Storing Stations Manually; Cd Player Operation; Playing A Disc - Aiwa CDC-X444 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Automatic tuning
If preset tuning does not work, try the automatic
tuning.
Press (SEEK) (+) or (SEEK) (–) to search for the
station.
Scanning stops when the unit receives a station.
Repeat the operation until the desired station is
received.
If the automatic tuning stops too frequently
Press (BTM SENS) repeatedly until "LOCAL•ON"
appears on the display.
The "LCL" indicator is displayed.
Only the stations with relatively strong signals will
be tuned in (local seek mode).
To cancel the local seek mode, press (BTM SENS)
once or twice so that the "LCL" indicator
disappears.
If you know the frequency of the station
(manual tuning)
Press and hold (SEEK) (+) or (SEEK) (–) to locate
the approximate frequency.
Then press (SEEK) (+) or (SEEK) (–) repeatedly to
fine adjust to the desired frequency.
Monaural mode
If FM stereo reception is poor, receive the station in
monaural mode.
During radio reception, press (BTM SENS)
repeatedly until "MONO ON" appears on the
display.
The "MONO" indicator is displayed.
To return to normal radio reception, press
(BTM SENS) again.

Storing stations manually

You can store only the desired stations on any
chosen number buttons.
1
Press (SOURCE) repeatedly to select the
radio.
2
Press (MODE) repeatedly to select the band.
3
Press (SEEK) (+) or (SEEK) (–) to tune in to
the desired station.
4
Press and hold the desired number button
((1) to (6)) until "MEM" appears.

CD PLAYER OPERATION

In addition to ordinary CD play, you can enjoy the
unit's following feature:
• CD TEXT information is displayed when a CD
TEXT disc* is played.
* A CD TEXT disc is an audio CD that includes
information such as the disc name, artist name,
and track names. This information is recorded on
the disc.

Playing a disc

(OFF)
(PUSH-MENU)
(SHUF)
(REP)
(SEEK)(+)/(SEEK)(–)
Insert a disc with the label side facing up.
"CD" appears on the display, and play starts.
If a disc is already inserted, press (SOURCE)
repeatedly until "CD" appears to start play.
In normal play, when the last track finishes, the
unit returns to the first track and continues to play.
(SOURCE)
(DSPL)
Z
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdc-x304Cdc-x204Cdc-x144Cdc-x104

Table des Matières