Cd Play; Error Displays/Messages Error Displays; Messages - Aiwa CDC-X444 Mode D'emploi

CD play

A CD cannot be inserted.
• Another CD is already inserted.
• The CD has been forcibly inserted upside down
or in the wrong way.
Play does not begin.
• Defective or dirty CD
• CD-R/CD-RW that is not finalized.
• You tried to play a CD-R/CD-RW not designed
for audio use.
• Some CD-Rs/CD-RWs may not play due to its
recording equipment or the disc condition.
A disc is automatically ejected.
The ambient temperature exceeds 50˚C (112˚F).
The operation buttons do not function.
CD will not be ejected.
Press the reset button.
The sound skips from vibration.
• The unit is installed at an angle of more than 45˚.
• The unit is not installed in a sturdy part of the
car.
The sound skips.
Dirty or defective disc.
12
ERROR DISPLAYS/

MESSAGES

Error displays
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
ERROR
• A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.
• A CD cannot play because of some problem.
t Insert another CD.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this
model to check the connection.
HI TEMP
The ambient temperature is more than 50˚C
(112˚F).
t Wait until the temperature goes down below
50˚C (112˚F).
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication
remains on, consult your nearest Sony dealer.
RESET
The CD unit cannot be operated because of some
problem.
t Press the reset button.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic
tuning (page 7).
" " or "
You have reached the beginning or the end of the
disc and you cannot go any further.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
"