Alarm Clock, Date/Time And Audio - LEGRAND 672 81 Manuel D'utilisation

2 - Use

Alarm clock, Date/Time and Audio

✔
To access to screen for the setting of the alarm clock date/time function,
touch the icon of the Home page for 3 seconds.
The following page of the alarm clock function will appear. Touch the
various icons to scroll through lines and pages (Alarm
clock page, Time/Date page and Audio page).
When scrolling through the lines, the selected line will be highlighted
in a white colour.
Alarm clock page
OFF
00:00
Time/Date page
00:00
01/01/00
Setting the alarm clock statuts
OFF
00:00
OFF
ON BIP
00:00
Alarm clock status:
OFF
Alarm clock off.
ON AUDIO
At the set time, the preset sound source comes on (only on the audio
unit associated to the device) Its volume will increase every 10 se-
conds, up to the highest level. Touch the screen to stop the volume
increasing.
ON BIP
At the set time, Local Display will issue an acoustic signal. Touch the
screen to stop the signal. The acoustic signal will automatically stop
after 2 minutes if the screen is not touched.
26
change the status of the
alarm clock
The selected line appears in green.
select the alarm clock
status (OFF/ ON AUDIO / ON BIP)
confirm the selection
set the alarm time