Operation Mode; Scenarios - LEGRAND 672 81 Manuel D'utilisation

2 - Use

Operation mode

■
Local Display includes three modes of operation:
• Scenario mode: this mode can be used to check/change the four
set scenarios.
• Sound system mode: this mode can be used to set a sound source
for the sound system.
This mode can also be used to set the alarm clock function.
• Temperature control
mode: the display shows the temperature of
the zone in which the system is installed. It can be used to adjust
the set temperature, change the operation mode (automatic/
thermal protection/antifreeze or off), and adjust the speed of the
fan-coil (if present).
With Local Display, it is only possible to manage one of the
three operating modes (scenario mode/sound system mode/
temperature control mode).

Scenarios

✔
This mode can be used to activate, setup, or cancel the associated
scenarios saved in the scenario module (035 51).
Home page
Scenario 1
Scenario 3
Activate scenario
To activate the desired scenario simply touch the corresponding icon on
the screen. A click will be heard, which confirms the selection.
22
Scenario 2
Scenario 4