How To Change The Walker To U Shape - Baninni TOTTI Mode D'emploi

ENG
Step 7
Step 7
7. Put the music toy board onto the groove on the upper tray, listen for 3 clicks to make sure it's
7. Put the music toy board onto the groove on the upper tray, listen for 3 clicks to make sure it's installed
installed firmly
firmly.
7. Put the music toy board onto the groove on the upper tray, listen for 3 clicks to make sure it's installed
firmly.
Pull the ring of the music toy tray
Pull the ring of the music toy tray on-
onward the seat,then pull up with
ward the seat, then pull up with certain
strength to disassemble the music toy
certain strength to disassemble the
Pull the ring of the music toy tray
tray from the upper tray.
music toy tray from the upper tray.
onward the seat,then pull up with
certain strength to disassemble the
music toy tray from the upper tray.
Step 8
Step 8
8. Completely assembled.
8. Completely assembled.
8. Completely assembled.

How to change the walker to U shape

Step 9
Step 9
9. Pull the device at both ends back as the picture showed and make the cross bar away from the
9. Pull the device at both ends back as the picture showed and make the cross bar away from the
18
9. Pull the device at both ends back as the picture showed and make the cross bar away from the
walker, it becomes U shape walker for baby pushing.
walker, it becomes U shape walker for baby pushing.
walker, it becomes U shape walker for baby pushing.
Assembling Procedures
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
How to Change Walker to U Shape
How to Change Walker to U Shape
4
4