Télécharger Imprimer la page

User Manual - Perel SSE017 Mode D'emploi

Masquer les pouces Voir aussi pour SSE017:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
Introduction
1.
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the
device into service. If the device was damaged in transit, don't install or use it and contact
your dealer.
Features:
Electronic lock: simple to operate and programmable with 3 to 8 digits.
Manual override key system
Solid steel construction
Inside is pre-drilled for fixation (fixing bolts incl.)
General Guidelines
2.
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will
void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Operation
3.
Opening the safe for the first time
• Remove the keyhole cover [B] and insert the override key
• Turn it counter clockwise and at the same time turn the rotary knob [A] clockwise and
pull to open the safe.
Note: DO NOT keep the override key(s) inside the safe!
Installing/replacing batteries
• When batteries are low, the red LED (left) on the keypad [C] lights up.
Note: To test the batteries at any time, enter your personal code. When battery condition is
poor, the red LED will light up.
• The safe requires 4x AA batteries (type R06); alkaline batteries are recommended.
• The battery compartment is located on the inside of the door. Open the battery cover
[D].
• Insert 4 new 1.5V type AA batteries (R06), following the polarity markings inside the
battery compartment.
WARNING:
Do not puncture or throw batteries in fire as they might explode.
Dispose of batteries in accordance with local regulations.
Keep batteries away from children.
Note: replacing the batteries clears the personal code. It is strongly advised to set a new
personal code immediately.
18/08/2009
SSE017

User manual

! Please read the manual thoroughly before bringing this
SSE017
3
©2008 Velleman
®
Components nv

Publicité

loading