Safety Instructions; User Manual - Perel SSE017 Mode D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
2.

Safety Instructions

Warning: Do not puncture batteries or throw them in fire as they may explode. Do not
attempt to recharge non-rechargeable batteries. Dispose of batteries in accordance with local
regulations. Keep batteries away from children.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.
4. Features
electronic lock: simple to operate and programmable with codes of 3 to 8 digits
override key included
solid steel construction
inside: pre-drilled for fixation (fixing bolts included).
5. Overview
Refer to the illustrations on page 2 of this manual.
6. Operation
Mounting the Safe
To reduce the risk of theft, the safe can be secured to the floor, wall, or in a cupboard using the pre-
drilled holes.
There are 4 mounting holes (Ø 8 mm), 2 in the back plate and 2 in the bottom of the safe. Use the
included screws to secure the safe.
Caution: The safe is heavy and shall therefore only be mounted on a solid surface or wall that is strong
enough to hold its weight. Install the safe in a horizontal position.
Opening the Safe for the First Time
1. Remove the keyhole cover [B] and insert the override key.
2. Turn it counter-clockwise and at the same time turn the rotary knob [A] clockwise and pull to open
the safe.
Important: do not keep the override keys in the safe.
V. 05 – 19/12/2013
SSE017

USER MANUAL

3 ©Velleman nv