Noise Information; Inserting/Replacing The Battery - Bosch Professional LR 6 Notice Originale

OBJ_BUCH-2648-003.book Page 15 Monday, August 29, 2016 11:54 AM
7 Centre-indication LED
8 Direction LED "move downward"
9 Reception area for the laser beam
10 Magnets
11 Guide groove for holder
12 Centre mark
13 Type plate
14 Serial number
15 Battery lid
16 Latch of battery lid
17 Holder* (1 608 M00 C1L)
18 Rotary knob of the universal holder
19 Guide rail
20 Holder latch
21 Pushbutton to release the lock

Noise Information

The A-weighted sound pressure level of the audio signal at one meter distance
is 80 dB(A).
Do not hold the measuring tool close to your ear!
Assembly

Inserting/Replacing the Battery

Alkali-manganese batteries are recommended for the measuring tool.
Pull the latch 16 of battery lid outward and open the battery lid 15.
Make sure that you insert the batteries at the correct polarity according to the illustra-
tion on the battery lid.
When the batteries become weak, the LED indicator 3 will begin to flash. It is still pos-
sible to work for about 2 hours with the measuring tool.
 Remove the batteries from the measuring tool when not using it for extended
periods. When storing for extended periods, the batteries can corrode and self-
discharge.
Bosch Power Tools
English | 15
1 609 92A 3BY | (29.8.16)