Cleaning and care
Wash the inside of the liner daily to avoid
any build up of bacteria. Use a simple,
unperfumed soap (ideally pH balanced).
Hand wash or Cool machine wash.
Perforated liners should be filled with
warm water, the proximal (open end) held
closed and the liner gentlly squeezed to
clear /flush the perforations.
Rinse well in clean water to remove all
residues and dry thoroughly before use.
Take care when drying and handling the
liner. Pat dry with a lint-free cloth or leave
to air dry. Do NOT leave the liner inside
out to dry as this can stretch the liner and
permanently distort the shape.
Take care handling the liner when it is
inside out to avoid picking up dust, grit
and other contamination which could
cause irritation to the skin.
Skin care
It is recommended that when using the
liner the residuum should be washed
daily with a simple, unperfumed soap
(ideally pH balanced). Rinse thoroughly to
remove any soapy residue before drying
thoroughly. Use a lotion for dry skin. Make
sure that any damaged skin is properly
and suitably dressed.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road, Basingstoke RG22 4AH, UK.
Silcare Breathe and Blatchford are registered trademarks of Blatchford Products Limited.
Do NOT tumble dry.
Do NOT use alcohol sprays,
household cleaners or abrasives
which could damage the liner and
cause skin irritation
Note:
Perspiration may discolour some
socket materials.
Precautions
Warning: To avoid danger of
suffocation, keep the liner away
from babies and children.
Keep away from direct heat sources
which could damage the liner.
Stop using the liner if it is torn or
damaged.
Stop using the liner if perforations
become enlarged as this can
cause skin to become trapped and
blistered.
For other medical conditions please
check with your physician or
medical practitioner for following
this recommendation for skin care.
Any deterioration in the residuum
condition should be reported to
your practitioner.
3
.
938368/3-0719