Dry Ironing; Product Care And Maintenance - T-Fal 1647 Mode D'emploi

9 - SPRAY
You can use the spray during dry ironing or steam ironing as long as
there is water in the reservoir.
Simply press the spray control (B) in bursts.

10 - DRY IRONING

Set the steam adjustment control (C) to dry "O"

11 - PRODUCT CARE AND MAINTENANCE

Before carrying out any maintenance on your iron, please ensure that
it is unplugged and that the soleplate has completely cooled down.
Never use any cleaning or descaling products.
Cleaning the soleplate
Your iron's Ultraglide soleplate can become stained with starch or by a textile ironed at an excessive-
ly high temperature. Clean the soleplate regularly while still warm with a damp non-metallic, non-scou-
ring pad. If you use starch, spray it preferably on the reverse side of the fabric to be ironed and clean
the iron soleplate more frequently.
Hint
Avoid placing your iron face down on a metal iron rest, as this will damage the soleplate. Place it on
its heel.
Anti-clogging valve
- The anti-clogging valve should be cleaned
once a month.
- Unplug your iron
- Empty the water tank
- Position the steam control wheel to "0" / "Dry"
- To remove the anti-clogging valve, pull it upwards using the
grips located on either side of the steam adjustment control.
DO NOT TOUCH THE END OF THE VALVE.
Soak the end of the valve for 4 hours in a glass of white
16
18
14
15
17