Positioning The Appliance; Water Connection - tomado TDW6001W Manuel D'utilisation

• Make sure that the appliance is not placed on the mains cable.
• Do not use an extension cable or a multiple socket for the connection.
The mains plug must be easily accessible after installing the appliance.
• Do not excessively bend the water inlet and drain hoses or the mains
cable during installation. Make sure that the water inlet and drain
hoses or the mains cable do not become stuck.
• After installing the appliance, make sure that you run the appliance
without dishes for the first time.

POSITIONING THE APPLIANCE

• When determining the place of the appliance, make sure that you
choose a place where you can easily load and unload it.
• Do not place the appliance in a location where the room temperature
can be below 0°C.
• Place the appliance close to a water tap or drain and mains socket.
Keep in mind that the connections will not be changed when they are
made.
• Do not hold the appliance at the door or control panel to move it.
• Make sure that the water inlet and outlet hoses do not get stuck while
placing the appliance.
• Place the appliance in a safe and level location.
• Make sure that the appliance is level and balanced by adjusting the
feet. When the appliance is placed correctly the door opens and
closes easily.

WATER CONNECTION

• Make sure that the indoor plumbing is suitable for installing the
appliance.
• Install a filter at the water supply to avoid damage to the appliance
due to contamination from the water (sand, clay, rust, etc.).
• Use the new water inlet hose supplied with the appliance. Before
making the connection, run water through the hose.
30 • English