The Recovery Procedure - Bosch DiBos 8 Recovery EMEA Manuel D'utilisation

DiBos 8 Recovery

The Recovery Procedure

General Informations
The bootable Recovery DVD is used to recover a DiBos 8 in the
following situations:
–
–
–
NOTICE!
i
Only send back the system if the problems still persists
following recovery.
Recovering a DiBos 8
Proceed as follows to recover a DiBos 8:
1.
NOTICE!
When saving the configuration the following settings will not be
transferred:
i
–
–
–
–
2.
Bosch Sicherheitssysteme GmbH
Updating the operation system to the latest security
patches.
The event of operation system problems.
Problems with the DiBos system which can not be solved
by updating the DiBos software.
In the DiBos configuration, click the Administration and
dongle menu. Click Save and save the configuration on a
external data medium.
Transmission rate and UDP tunneling
Network settings (e. g. IP address, subnet mask, standard
gateway)
Computer name and work group
Dongle extension file
Write down the settings for the transmission rate and UDP
tunneling.
– In the DiBos configuration, click the Security and
network menu. Write down all the settings in the
Transmission rate and UDP tunneling boxes.
Installation Guide
The Recovery Procedure | en
F.01U.076.408 | V1 | 2007.11
29