Staba AW 210 Pure Mode D'emploi page 12

∙ Never use the device on or near to hot surfaces
∙ Place the device on a firm even surface. Ensure that there is
sufficient space around the device to guarantee correct venti-
lation.
∙ Do not cover with a blanket or other things.
∙ Do not place sharp metal objects or fingers in the air outlet
∙ Do not use the device in the bathroom or a room with a high
level of air humidity
∙ Only operate the device if the parts is correctly inserted and the
backside is closed.
∙ Do not use next to open flames to avoid fire
∙ Do not spray anything into the device
∙ Do not direct the air outlet to veneer etc.
Cleaning
∙ Do not immerse the appliance into water.
∙ Unplug the device before every cleaning.
∙ For hygienic reasons, the device should be cleaned every 14
days.
∙ If the device shouldn't be used for more than 3 days, the water
in the water tank has to be replaced.
∙ Push the tank cover to the right.
∙ Remove the tank, open the tank cap and remove the water.
∙ Then, remove the water tray with the humid disc pack.
∙ Clean the disc pack with warm soapy water.
∙ Depending on the water hardness, the limescale must be re-
moved from the tray and the disc pack. Depending on the scale
you can use water added with vinegar or decalcifier. Do not use
aggressive detergents.
∙ The assembly is as followed: Place the gear wheel of the disc
pack into the gap of the water tray. Insert the water tray with
the disc pack. Then, insert the water-filled water tank and close
the lid.
∙ Depending on the dust, the foam material filter has to be washed.
12