Belkin PUREAV AVU1500 Guide D'utilisation page 21

Features | Rear Panel
38
38. Trigger Out – this feature enables remote operation of other
peripheral devices equipped with a low-voltage trigger. When your
AVU1500's switched outlets are powered on or off, a low-voltage
signal is sent out to trigger another device to activate it. For
example, when your switched outlets are powered on, a signal could
be sent to a retractable projector screen so that it comes down;
when the switched outlets are powered off, the same projector
screen would retract.
a. Delay/No Delay slide-switch – you can choose to have the
signal sent out to be delayed. The delay time is the same as the
delay time for the filter-banks settings.
b. DC trigger-out port – connect the included Remote DC Control
Cable between this port and the peripheral device you wish to
control (e.g., movie projector screen).
40
c
39. Coaxial-cable line input/output – connect your coaxial cables here
to protect them from dangerous electrical disturbances that can
travel down your coaxial-cable lines. The auxiliary input splits the
incoming signal to two output connections.
a
b a
b
39
18
®
®