Table des Matières
Publicité
1
AUTOMATIC PAPER TOWEL DISPENSER
INSTRUCTION MANUAL
READ THESE INSTRUCTIONS PRIOR TO INSTALLATION
PACk AGE CONTENTS
INSTALLATION
Bracket Installation
1.
Select a location to mount the INNOVIA
location is away from any cooking appliances.
2.
Tape template in the desired location ensuring that the clearance noted
Image 1
on the template is available (Image 1).
3.
Mark or drill a pilot hole in the locations specified on the selected side of
the template. If you choose to drill a pilot hole, take care not to drill
completely through the cabinet surface.
4.
Using a screwdriver and the provided screws (8), secure the bracket to
the mounting surface. Do not overtighten (Image 2).
Dispenser Installation
Image 2
1.
There are three sets of posts included (see parts list on reverse)
depending on how you wish to mount the INNOVIA Dispenser; flush
mount (which is installed at the factory), 1 inch and 2 inch below the
underside of the cabinet to accommodate the facia. Should you wish
to utilize the 1 or 2 inch posts, simply unscrew the flush mount posts
and install the desired length.
2.
The bracket has 4 slots that accept the posts on top of the dispenser.
Image 3
Insert the posts into the slots and slide the dispenser sideways to lock
into place (Image 3).
®
Dispenser. Make sure the
Publicité
Table des Matières
