Cleaning And Storage; Troubleshooting - easymaxx Q0E120 Mode D'emploi

Cleaning and Storage

PLEASE NOTE!
■ Before commencing the cleaning, note the safety instructions in the "General Power
Tool Safety Warnings" chapter!
• Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface. Wipe down the device with a soft damp cloth if necessary.
• Keep the power tool out of the reach of children and animals in a dry, clean, frost-free
place which is protected from direct sunlight.

Troubleshooting

If the power tool does not work properly, check whether you are able to rectify the
problem yourself. If the problem cannot be solved with the steps that are listed, contact
the customer service department.
Do not attempt to repair a power tool yourself!
Problem
The object is not
infl ated.
The device cannot
be switched on.
The battery pack is
not charging up. The
control lamp of the
charging station is
not fl ashing.
02648_DE-EN-FR-NL_A5_V4.indb 23 02648_DE-EN-FR-NL_A5_V4.indb 23
23
Possible cause
Air is escaping at the connec-
tions between the air outlet
opening (10), compressed air
tube (8), adapter (4) or valve.
The battery pack (5) is too
weak?
The battery pack is not insert-
ed in the device correctly.
The battery pack is empty.
The battery pack is not in-
serted in the charging station
correctly.
The plugs are not connected
to the charging station and
plug socket correctly.
If the control lamp of the
mains adapter is not fl ashing,
there is no mains voltage.
Fix
Check the connections and
twist them tight.
Charge up the battery pack.
It must engage audibly.
Charge up the battery pack.
Plug in the battery pack.
Correct the connections.
Try another plug socket or
check the fuse of the mains
connection.
11.12.2019 14:17:21 11.12.2019 14:17:21
EN