Overview Of The Power Tool; Charging Up The Battery Pack - easymaxx Q0E120 Mode D'emploi

Check the items supplied for completeness and the components for transport damage.
If you fi nd any damage, do not use the power tool but contact our customer service de-
partment.
Remove any possible fi lms, stickers or transport protection from the power tool. Never
remove the rating plate or any warnings.

Overview of the Power Tool

11
10
9
8
7
6
5
4

Charging Up the Battery Pack

PLEASE NOTE!
■ Only charge the battery pack at the an ambient temperature of from 0°C to 40°C.
■ Only ever charge up the battery of the power tool with the mains adapter supplied
with it.
Charge up the battery pack (5) before you fi rst use it! Before charging it up, ensure that
the contacts on the battery pack and the charging station are clean.
02648_DE-EN-FR-NL_A5_V4.indb 21 02648_DE-EN-FR-NL_A5_V4.indb 21
21
1
2
3
1. Detach the battery pack from the device: Press both re-
lease buttons (3) simultaneously and pull the battery pack
off the device.
2. Plug the battery pack into the charging station.
3. Unwind the cable fully before connecting it.
4. Connect the barrel connector on the cable of the mains
adapter to the socket on the charging station.
5. Insert the mains adapter into an easily accessible socket.
The control lamps of the charging station and the mains
adapter start to fl ash and indicate that the battery pack is
being charged.
1 Pressure display in bar and psi
2 Grip
3 Release button (on both sides)
4 Adapter (e. g. for balls, tyres)
5 Battery pack
6 Adapter holders
7 On switch
8 Compressed air tube
9 Turning ring
10 Air outlet opening
11 Compressed air tube holder
Not shown:
• Charging station
• Mains adapter
EN
11.12.2019 14:17:21 11.12.2019 14:17:21