Connecting The Monitor And Turning The Monitor On And Off; Connecting The Monitor To A Computer (Pc Etc.); Connecting The Monitor To Headphones And A Microphone; Connecting The Monitor To A Power Source - Sharp LL-T15S1 Mode D'emploi

Connecting the monitor and turning
Connecting the monitor to a computer
(PC etc.)
When connecting, ensure that both the monitor and
computer are switched off.
Note:
- Do not overly bend the cable or add extension cords
as this could lead to malfunction.
Firmly insert the analog RGB output
terminal (mini D-sub 15 pin with 3 rows)
then tighten the screws each side.
RGB cable
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh
conversion adapter (to be purchased
separately) to the RGB signal cable.
Macintosh conversion adapter
RGB signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
Using the audio cable included, the computer's audio
output terminal or a microphone terminal can be con-
nected.
Audio input
Microphone output
terminal
terminal
Audio cable
Note:
- DO only connect cables less than 3m to the LL-
T15S1.
the monitor on and off
Connecting the monitor to headphones
and a microphone
Headphones and a microphone (both to be purchase
separately) can be connected here.
Note:
-
Note:
-
-

Connecting the monitor to a power source

Before connecting, first turn off the monitor's main
power switch.
Note:
-
1. Connect the AC adapter to the monitor's power
2. Attach the power cord to the AC adapter and place
PC (Microphone
terminal)
PC (Audio output
terminal)
12
Do not overly bend the cable or add extension cords
as this could lead to malfunction.
Microphone
terminal
Headphone
terminal
DO only connect cables less than 3m to the LL-
T15S1.
When the headphones are connected, no sound can
be heard from the monitor speakers.
Do not overly bend the cable or add extension cords
as this could lead to malfunction.
terminal
the power plug into the AC terminal.
Microphone
Headphones
Power terminal
AC adapter
Power cord