EQUATION EF431LV-E Notice De Montage, Utilisation Et Entretien page 116

FR FR
7. REMOTE OPERATION
ES ES
The max. duration of each setting item is 23 hours 50 minutes
The setting date for each item can be any day or days of a week
PT PT
The date in each setting item represents the date of power-on time
If the shutdown time of the setting falls on the second day, it is unnecessary to
IT IT
set the date – you just set the shutdown time
2)Steps to view the timer setting
EL EL
Press the "PROG SET" button
Press the "+" or "-" to check the power-on time of the timer one by one.
PL PL
For checking the shutdown time, press the "▲" button
Press the "+" or "-" to continue viewing
RU UA
For deleting the current item of setting, press "C" to delete
3) Steps for timer setting
(I) Select the settings of the serial number
KZ
RO
Press the "PROG SET" button, and the serial number starts blinking
Press the "+" or "-" to change the serial number until you get the serial number
EN
UA
that you need to set or modify.
(II) Select date
RO
Press " PROG SET" button once again, and the cursor on the left side of day
starts blinking
BR
Press the "▲" or "▼" keys to move the cursor to the corresponding day, press
the "+" to add the corresponding day, or press "-" to delete the day until you
have completed the selection of all dates
EN
(III) Set the start time
Continue to press the " PROG SET" button, the hour starts blinking
Press the "+" or "-" to adjust the hour
Continue to press the " PROG SET" button, the minute starts blinking
Press the "+" or "-" to adjust minute
(IV) Set the shutdown time
Then press the " PROG SET" button, the display is off, and the hour starts blinking
Press the "+" or "-" to adjust the hour.
Continue to press the " PROG SET" button, the minute starts blinking
Press the "+" or "-" to adjust minute
(V) Set temperature
Then press the " PROG SET" button, and the temperature set starts blinking. At
this moment, the temperature displayed is normally set temperature, which
can be adjusted by pressing "+" or "-"
(VI) Press " PROG SET" button to continue setting, and press "OK"
complete the setting
116