Cleaning And Maintenance - SilverCrest SEMK 105 A1 Mode D'emploi

Cleaning and maintenance

DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from the mains
power socket! Otherwise, there is a risk of electric shock!
► Never open any parts of the housing . There are no serviceable parts
whatsoever inside . When the housing is open, there is a risk of a potentially
fatal electrical shock .
► Drain the water from the water tank
Otherwise, bacteria can start to build up!
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive or caustic cleaning agents . These can attack the
surface and damage the appliance beyond repair .
► Do not use boiling water to clean the appliance .
► Do not clean the metal pins in the rear of the appliance with a cloth or
similar . Scratches could negatively affect the production results .
♦
Remove the ice basket
damp cloth . Make sure that you do not damage the metal pins in the rear
of the appliance . These should not be cleaned with a cloth .
For stubborn dirt or deposits, add a little mild vinegar to the cloth . Rinse the
water tank
drain opening
with a cloth moistened only with water .
♦
Clean the ice scoop
washing-up liquid .
♦
Wipe off the housing and the mains cable
stubborn dirt, add a mild detergent to the cloth . Afterwards, wipe the
appliance clean with a cloth moistened only with water to ensure that no
detergent remains . Make sure that the appliance and the mains cable
are completely dry on the outside before the next use .
♦
Before first use, run through three production phases as described in the
section "Operation and use" and dispose of the remaining water as well
as the ice cubes . This ensures a self-cleaning of the appliance .
SEMK 105 A1
WARNING
with fresh water and allow this water to run out through the
on the underside of the appliance . Afterwards, wipe off
after a maximum of 24 hours .
and wipe out the inside of the appliance with a
and the ice basket in warm water and little
with a damp cloth . For more
GB │ IE │ 27 ■