Programming Track Numbers - Philips MAGNAVOX AZ 2725 Mode D'emploi

CD PLAYER
Searching for a passage within a track
You can search for a passage within a track. The CD is played at low volu-
me and at high speed, however, the sound is still recognizable.
1. Keep the SEARCH ∞ or § button 0 pressed during playback, and
release the button as soon as you recognize the required passage.
– Normal CD playback will resume at this point.
SHUFFLE/REPEAT
The MODE button allows you to select four different modes. The modes
can be selected or changed before or during playback.
1. Press MODE 0 until the desired function appears on the display.
SHUFFLE - Tracks are played in random order.
SHUFFLE REPEAT ALL - To repeat the CD continuously in random order.
REPEAT - Continuous playback of the current track.
REPEAT ALL - Repeats the entire CD.
– Except for REPEAT, during playback you can use SEARCH ∞ or § 0
to skip tracks.
– The SHUFFLE/REPEAT modes can also be combined with PROGRAM
2. To leave the SHUFFLE mode, press the MODE button 0 repeatedly
until the various SHUFFLE/REPEAT modes are no longer shown on the
display. You can also press STOP 9 0 to quit playback.

PROGRAMMING TRACK NUMBERS

You may store up to 20 tracks in the memory in any sequence.
You may store a track more than once.
Programming track numbers
1. Select the desired track using SEARCH ∞ or § 0.
– The display will show the required track number.
2. Store the desired track by pressing PROGRAM 0 once.
3. Select and store all desired tracks of a CD this way.
Checking a program
1. To review the program, press PROGRAM 0 for more than 2 seconds.
– The display will show the track numbers you have selected in
sequence.
2. Start playback of the program by pressing PLAY•PAUSE 2; 0.
Erasing a program
You can erase a program by;
– pressing STOP 9 0 during programming;
– pressing STOP 9 0 again in stop position;
– pressing STOP 9 0 twice in play mode;
– opening the CD door.
12
X 5
8
X 4
REPEAT 1
8
REPEAT ALL
8
SHUFFLE
REPEAT ALL
8
8
X 3
X 2
SHUFFLE
X 1