Digital Tuner; Radio Reception - Philips MAGNAVOX AZ 2725 Mode D'emploi

DIGITAL TUNER

RADIO RECEPTION

1. Set the source selector 6 to TUNER.
2. Adjust the sound using the VOLUME 3 4 2, TONE 4 and DBB 1
controls.
3. Select the wave band using the BAND selector #.
4. Tune to a radio station using the TUNING ∞ § button %.
– The radio automatically tunes to a radio station with sufficient
reception.
Press TUNING ∞ § % repeatedly until you find the desired radio
station.
– To tune to a weak station, briefly press TUNING ∞ or § % until
you have found optimum reception or until the correct frequency is
shown in the display.
To improve radio reception
– For FM, pull out the antenna. To improve FM reception, incline and turn
the antenna. Reduce its length if the FM signal is too strong (very close
to a transmitter).
– For AM, the set has an internal antenna, so the external antenna is not
needed. Direct the internal antenna by turning the whole set.
5. To switch off the set, move the source selector 6 to TAPE/OFF.
PROGRAMMING STATIONS
You can store up to 29 radio stations in the memory. When tuning to the
preset station, the preset number (1 to 29) is indicated in the display.
1. Follow the four steps given under 'RADIO RECEPTION'.
2. Press PROGRAM $ to program the desired station.
– If the station is already stored in the memory, the preset number will
be displayed.
3. Press PRESET 3 4 @ to enter a number, from 1 to 29, for your
selected station.
4. Press PROGRAM $ to confirm the setting.
Tune to PRESET stations
1. Press PRESET 3 4 @ until the desired preset number appears on the
display.
10
FM
AM
PORT PORT
ABLE ABLE PORT PORT ABLE ABLE
CD MINI CD MINI CD MINI CD MINI
SYST SYST EM EM SYST SYST EM
BASS EM
BASS REFL REFL BASS BASS REFL REFL
EX SPEA EX SPEA EX SPEA EX SPEA
KER SYST KER SYST
EM EM
RECO RECO RECO RECO
RD RD RD RD
2 2
PLAY PLAY
KER SYST KER SYST
EM EM
2 2
PLAY
PLAY