NETGEAR AirCard 762S Guide De Démarrage Rapide page 7

Step 2: Connect to the
Internet
1 . Press and hold the Power key for a
few seconds . Once powered up, the 4G
mobile hotspot automatically connects
to the mobile broadband network .
The first time you turn on the 4G mobile
hotspot, you may be asked to select a language on the LCD:
a . Press the Navigation key to cycle through the available
languages until you see the one you want to use .
b . Press the Power key to select the displayed language .
(You can change the language again later from the
homepage . )
2 . The LCD screen displays the message "Connect your computer
to Wi-Fi network" and shows you the Wi-Fi SSID (Network
name) and Wi-Fi Passphrase .
4G
SSID: AirCard-xxxx
Wi-Fi Passphrase: 12345678
To configure your hotspot
go to http://aircard.hotspot
Note: The LCD screen goes into sleep mode to save power . To
wake up the LCD screen, press and release the Power key .
3 . On your computer or mobile device, open your Wi-Fi/network
connection manager .
4 . Select the Wi-Fi SSID displayed on the LCD screen .
5 . When prompted, enter your Wi-Fi Passphrase, as it appears on
the LCD screen .
When the computer or mobile device connects to the 4G
mobile hotspot, a '1' appears beside the Wi-Fi icon on the LCD
screen .
Note: To connect to the mobile broadband network, your SIM
account must be active . If you use a pre-paid or pay-as-
you-go SIM, the account must have a positive balance .
Network
6