Storch Opti-Air Mode D'emploi page 33

Installation
Connect the mains adapter to an earthed 230 V socket
that is fused with a minimum of 10 A. Position the device
on an even surface at a distance of 3 m to the window at
which you would like to install Opti -Air.
In a first step, remove the
two hoses from the transport
bag and pull the air bellows
from the dual hose.
Then attach the dual hose to
the device side with the inta-
ke and blower opening .
IMPORTANT: do not operate STORCH Opti-Air in env-
ironments with explosive gases or flammable dust.
Always install and start-up the device prior to starting the
actual work. This prevents an enrichment of solvent con-
centrations in the environment air and odour pollution.
33
Clamp the larger dual hose
of the intake union on the
window frame using
quick-release fastener and
position the air bellows in the
window gap.
Two usage variants
are available:
Selective air extraction:
connect the second, smaller
hose to the long device side
with the square turbine
opening: a great deal of poor
ambient air is extracted.
Selective air supply:
connect the second, small
hose to the short device
side with the round turbine
opening : a great deal of fresh
air will be supplied.
Translation of the original instruction
the