Berner 206956 Notice D'utilisation page 3

(EN)
Technical Data:
Lamp:
Battery: Lithium-Ion 3.7V DC, 2200mA
Running time: approx. 3.5 hours
Brightness: approx. 450 Lux @ 0,5 Meter, 350lumen
IP rating: IP20
Main features:
A. Special design optical lens offering 90 degree flood light
B. 1W high power LED on top supply 300lux@0.5m light output,100lumen
C. 180 degree bendable
D. Strong magnet on bottom, two hooks on back, work with it anywhere
E. USB charging system, convenient charging with computer or other digital devices
Instructions for use:
1. Connect the charger to main electricity. The indicator on lamp will show red if the connect to main electricity
is right.
2. Switch off the lamp before connecting to the charger.
3. The indicator on lamp will turn red indicating charging begins
4. The indicator on lamp will turn green indicating charging completed.
5. Switch sequence one = spot light, second = main light, third = off
Caution:
1. Fully recharge the lamp until indicator turn into green recommend to wait 30 mins before first use
2. Avoid looking directly into the beam.
3. Switch off the lamp when not in use
4. If lamp will be stored for one month or more, please fully charge it prior to storage.
5. Do not use the lamp near open fl
6. CAUTION: MAX INPUT 5V DC / 2A !!!
Recommend charger: Connector:
micro USB connector Voltage:
5V DC
Current: MIN: 300mA, MAX: 2A
Power Connection:
Verify that the voltage of the battery charger corresponds to that of the system. Use the lamp within places
prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fi t's on the cable is suitable for the work environment, if it is not, it must be replaced.
Advice for cleaning and care:
The surface of the Berner lamps is made of high grade synthetic material. Please don't use corrosive or
aggressive cleaner, these may damage the surface.