Saeco SUP021YADR Mode D'emploi page 31

Warning! Hot water and steam may cause burns! Direct the steam tube toward the drip tray.
Before dispensing hot water, check on the display that the function has been selected.
Fill a cup to 1/3 with cold
milk.
STEAM
Open the knob to release Move the cup in a circular
steam. The machine will fashion to heat the milk
signal the function evenly.
Open the knob to
discharge any residual
water. Close the knob.
SELECT PRODUCT
READY FOR USE
Check that the steam Place a container beneath
function has been selected. the steam tube. Open the
knob to discharge any
residual water.
After frothing the milk,
close the knob.
Place the cup beneath the Heat by moving in circles.
steam tube.
Open the knob.
When only steam comes
out, close
Remove the container.
Remove the cup and
position it beneath the
brew unit
SELECT PRODUCT
STEAM
READY FOR USE
Close the knob.
STEAM / CAPPUCCINO
Position the cup containing
the knob. milk beneath the steam
tube.
Dispense coffee into the
cup to prepare a delicious
cappuccino.
Remove the container.
31