CareFusion Micro I Mode D'emploi page 60

Switching Off
The unit is switched off by pressing the On/Off button.
The unit can disconnected from the mains by unplugging the charger
from the mains socket or unplugging the USB cable.
Maintenance
Battery Management
The Micro I is powered by a rechargeable battery pack.
The battery voltage is monitored and a warning is displayed on
switch on when the battery starts to become exhausted.
Battery Status Icons
Battery nearly exhausted. Recharge as soon as possible
to avoid running out of charge.
Battery fully charged.
The battery is not required to hold the internal memory and stored
results will not be lost when the battery becomes exhausted.
To recharge the battery connect the Micro I to the charger provided
and then plug the charger into a suitable wall socket ensuring that
access to the charger is not restricted so that it may easily be
removed.
The Micro I will display:
56