Intended Use; Environment; Getting Started - CareFusion Micro I Mode D'emploi

Intended Use

The Micro I is used by clinicians and healthcare professionals for the
diagnosis of asthma and COPD in adults and children over the age of
3 years.

Environment

Please observe the following precautions:
Avoid exposing the Micro I to direct sunlight.
•
Avoid operating the spirometer in dusty conditions or near to
•
heating appliances or radiators.
Do not keep the spirometer in a damp place or expose it to
•
extreme temperatures.
Do not direct the transducer holder towards a strong light
•
source whilst operating the spirometer.

Getting Started

It is recommended that Micro I spirometer is fully charged before
use. The power supply is provided with separate UK, USA and
European plugs. Connect the required plug to the power supply and
plug in to a mains outlet. Connect the Micro I to the power supply
using the USB/charging cable and the charging symbol will appear
on the screen.
Fully charge for a minimum of 5 hours when used for the first
time.
Remove the protective film from the display screen before use.
12