Pioneer VSX-LX70 Mode D'emploi page 11

Setup
3 Select 'Network Setup' and press ENTER to confirm
your selection.
The 'Network Connection' screen appears.
4 Either 'Network Found' or 'No Network Found'
appears. Check the network connection status and
press ENTER.
• Network Found – Connected to a component on the
network.
• No Network Found – Not connected to a
component on the network.
The 'Network IP Settings' screen appears.
5 Select 'Static IP Address' and press ENTER to
confirm your selection.
The 'IP Address' screen appears. When you select
'Automatic (DHCP)', the network is automatically set up,
and you do not need to follow Steps 6 to 15. Proceed with
Step 16.
Hom e M ed ia G
Net wo r k IP Se t t in gs
[ Au t o m at ic ( DHC P)
[ S t a t ic IP Addr e ss
6 Select 'Change' and press ENTER to confirm your
selection.
The 'Edit IP Address' screen appears.
H ome M e dia G - 5 5.0dB
IP Add re s s
[ 0 .0.0 .0
[ 1 C ha n g e
Re t ur n
7 Enter the IP address.
Press the / buttons to select a number and the /
buttons to move the cursor. After you select the last
number, press the  button or ENTER. You can also use
the numeric buttons to enter a number. The 'Subnet
Mask' screen appears.
8 Select 'Change' and press ENTER to confirm your
selection.
The 'Edit Subnet Mask' screen appears.
H o me Me d ia G - 5 5 .0dB
S ub n e t Ma sk
[ 0.0 .0 .0
[ 1 Ch an g e
Re t u r n
9 Enter the subnet mask.
After entry, press the  button or ENTER. The 'Gateway
IP' screen appears.
- 55 .0dB
]
]
Retu r n
Hom e M ed ia G - 5 5.0dB
E dit I P Add r ess
]
] 19 2:1 68: 000 :00 2
Ret ur n
Ho m e M ed ia G - 55 .0dB
E d it S ub net M ask
]
] 255 :25 5:2 55: 000
Re tu r n
10 Select 'Change' and press ENTER to confirm your
selection.
The 'Edit Gateway' screen appears.
H o me Me d i a G - 5 5 . 0dB
G a tew ay IP
[ 0 .0 . 0 . 0
[ C ha n g e 1
R e tu rn
11 Enter the default gateway IP address.
After entry, press the  button or ENTER. The 'DNS
Server Preferred' screen appears.
12 Select 'Change' and press ENTER to confirm your
selection.
The 'Edit DNS Preferred' screen appears.
H o me Me d i a G - 5 5 . 0dB
D N S S e r v e r P re fe rre d
[ 0 .0 . 0 . 0
[ 1 C ha n g e
R e tu rn
13 Enter the preferred DNS server address.
After entry, press the  button or ENTER. The 'DNS
Server Alternate' screen appears.
14 Select 'Change' and press ENTER to confirm your
selection.
The 'Edit DNS Alternate' screen appears.
H o me Me d i a G - 5 5 . 0dB
D N S S e r v e r A lt e rna te
[ 0 .0 . 0 . 0
[ C h a n g e 1
R e tu rn
15 Enter the alternate DNS server address.
In case there is only one DNS address, you do not need
to enter the alternate DNS server adddress.
After entry, press the  button or ENTER. The 'Enable
Proxy Server' screen appears.
16 Select 'No' or 'Yes' for the proxy server setting to
deactivate or activate the proxy server.
In case you select 'No', proceed with Step 21. In case you
select 'Yes', on the other hand, proceed with Step 17. The
'Proxy Hostname' screen appears.
H o me Me d i a G
E n a bl e P rox y S e r v e r
[ N o
[ Ye s
H om e M e d ia G - 5 5 .0dB
E d it G a t ew ay I P
]
]
1 9 2 :1 6 8 :0 0 0 : 0 0 1
R e t urn
H om e M e d ia G - 5 5 .0dB
E d it D N S P re fe rre d
]
] 1 9 2 :1 6 8 :0 0 0 : 0 0 1
R e t urn
H om e M e d ia G - 5 5 .0dB
E d it D N S A lt e rn a te
]
] 1 9 2 : 1 6 8 :0 0 0 : 0 0 1
R e t urn
- 5 5 . 0dB
]
]
R e tu rn
04
11
En