Electrical Connections; Correct Use - Hotpoint Ariston HB 0805 UP0 Mode D'emploi

it en
• For appliances with fitted plug, if the plug is not suitable for you socket
outlet, contact a qualified technician.
• Do not use extension leads, multiple sockets or adapters. Do not
connect the appliance to a socket which can be operated by remote
control.
• The power cable must be long enough for connecting the appliance,
once fitted in its housing, to the main power supply.
• Do not pull the power supply cable.
• If the power cable is damaged it must be replaced with an identical
one. The power cable must only be replaced by a qualified technician
in compliance with the manufacturer instructions and current safety
regulations. Contact an authorized service center.
• Do not operate this appliance if it has a damaged mains cord or plug, if
it is not working properly, or if it has been damaged or dropped. Do not
immerse the mains cord or plug in water. Keep the cord away from hot
surfaces.
• Do not touch the appliance with any wet part of the body and do not
operate it when barefoot.

ELECTRICAL CONNECTIONS

Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, contact After-
Sales Service for further instruction. Do not attempt to change the plug
yourself. This procedure needs to be carried out by a qualified technician
in compliance with the manufacturer's instructions and current standard
safety regulations.

CORRECT USE

• Make sure that all parts and lids are securely locked in palce before
operating the appliance.
• The fasteners must be locked in the two clip positions, otherwise during
operating the bowl lid may rotate as the motor rotates.
• Do not attempt to tamper with the lid interlock mechanism.
• Before disassembling the appliance, switch off the unit and wait until
the blades have come to a complete stop.
18