Nüby 1564 Mode D'emploi page 21

1. When ready to begin, insert plug into wall outlet.
2. Measure 45 ml of water and pour directly into the warmer basin.
3. Place pacifier or small accessory in the lift-out basket. Always use
this basket to prevent damage to pacifiers and small accessories.
4. Place the sterilizing lid on top of the unit.
5. Press the POWER button to turn your unit ON. The sterilization
TO CLEAN
Clean unit and parts before initial use and after each subsequent use. Always unplug unit and ensure that it is cool before cleaning. Warming
and sterilizing unit: Wipe surface of unit as well as inside of the warming basin with a damp cloth or sponge using mild liquid soap. Wipe with
clean water. Do not submerge unit. Measuring cup, lift-out basket, adapter ring, and sterilizing lid: Dishwasher safe (top rack) or wash with soapy
water. Rinse with clean water. Allow to air dry. Do not use scouring pads, abrasives or solvents for cleaning; they may damage the appliance and
its surfaces.
TO DE-SCALE
It is helpful to de-scale your Bottle Warmer every four weeks to ensure that it continues to work properly. To de-scale, mix 2 oz (60 ml)
of white vinegar with 4 oz (100 ml) of cold water and pour into the warming basin. Allow liquid to stand in the unit until any deposits
(limescale) have dissolved. Discard liquid and rinse with clean water. Any other servicing should be performed by an authorized service
representative.
ELECTRICAL SCALE RATING
Input voltage: 220V-240V
Wattage: 300W
USA Safety Approval: C-UL-US
EU Safety Approval: CB, GS
CEE 7/7
GUARANTEE
Keep the receipt or invoice of this product !
- New Valmar BVBA guarantees its products for the legal period of time starting from the date of purchase. If any defect due to faulty materials
and workmanship occurs within the guarantee period New Valmar BVBA will repair or replace at its expense. New Valmar BVBA will only pay for
repair or replacement if convincing proof is provided (by means of a receipt or invoice) that the day on which service is claimed is within the
guarantee period.
- The guarantee does not cover products and/or product parts that are subject to wear, that can be considered as consumable parts by their
nature or that are made by glass.
- The guarantee is not valid if a defect is due to to damage caused by incorrect use, poor maintenance (e.g. parts blocked by scale) or if altera-
tions or repairs have been carried out by persons not authorized by New Valmar BVBA.
- For the appliance to be used correctly, the user should strictly adhere to all instructions included in the instructions for use and should abstain
from any actions or uses that are described as undesired or which are warned against in the instructions for use.
- These guarantee restrictions do not affect your statutory rights.
Take your defective product - with the receipt or invoice of this product - back to the shop where you purchased this product.
process will begin automatically. The unit will turn off once water
runs out.
6. When sterilizing is complete, remove the lid carefully by the
handle. LID WILL BE VERY HOT. Keep hands and face away from
unit when opening lid. Allow unit to cool for at least 10 minutes
between uses.
PICNV 1564 - 21