Manual Switch - Grasslin Talento 971 Mode D'emploi

14. Manual switch

You change – manually – the current switching state.
However, the individually set switching program is preserved.
1 for channel 1
3 for channel 3
= Automatic
= OFF
= ON
The switching state
corresponds to the
entered program.
15. DCF 77 radio operation
The time switch receives the time signal DCF77 with an
additional antenna.
! Follow the separate instructions !
While the time swtich is being synchronised, the
flashes in the display. It is then displayed continuously.
2 for channel 2
4 for channel 4
= Manual mode
= ON
= OFF
You change
– m a n u a l l y –
the current switching
state.
The next switching
command in the
program is executed
again automatically.
FIX = continuous operation
FIX = Continuous ON
FIX = Continuous OFF
You change
– m a n u a l l y –
the current switching
state.
Only with the
can you switch from
manual operation back
to automatic operation.
symbol
34
key