Grasslin Talento 971 Mode D'emploi page 56

GB
Setting the cycle time from 01 ... 99
Press the
Note: If the key is pressed
for longer, adjustment
takes place in increments
of 05.
Setting the ON switching duration,
01 ... 99
This can never be greater than the
previsously set cycle time.
Press the
Press the Prog. key 1x only briefly.
The switching command is saved.
A free memory location is displayed
– for additional inputs.
or
Press the key 1x.
The input is completed.
The display shows the
date and the time.
key step-wise
key step-wise.
29