Left Back Panel; Right Back Panel - Twin-Star International 23MM070 Manuel D'instruction

14. Locate Left Back Panel (J), Right Back
Panel (K) and Center Back Panel (P),
attach to the back of the completed
assembly from step 13. Use a Phillips
Head screw driver, tighten screws (Q)
through the pre-drilled holes in the Back
Panels to the completed assembly.
15. Locate Right Front Door (U) and Left Front
Door (R). Slide door hinge keyhole into
panel hinge bracket. (Diagram 1)
Use Phillips Head Screwdriver to tighten
screws. (Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change
keyhole slot position.
(As Shown In Diagram 3a)
To adjust door right or left loosen/tighten
screw. (As Shown In Diagram 3b)
To adjust door up or down adjust bracket
height. (As Shown In Diagram 3c)
E-5
P
K
Right
Back
Panel
1
2
Left
Front
R
Door
Screw
J
Q
J
Left
Back
Panel
3
3b 3c
3a
Right
Front
U
Door