ProfiC_BDA_DKP_3184_ka2.qxd
TIMER enter disconnecting time
GB
The cooking functions can be limited in time.
• Select a cooking function.
• Afterwards press the TIMER button. The TIMER light and the light for the cooking func-
tion flash.
• Now you can set the desired turn-off time with the buttons (-/+). The maximum time
amounts to 180 minutes.
• After about 3 seconds the lights stop flashing and the light for the cooking function glows
steadily.
i
NOTE:
- After the timer has been switched on you can change the levels with the buttons
(+/-) at any time.
- Interrupt: You can interrupt this process at any time by pressing the ON/OFF
button (2).
- The end of the cooking time will be announced in the last minute by an acoustic
signal.
Switching off
• Push the ON/OFF button (2).
• The hob changes back to the standby mode from whatever operating mode. The opera-
ting mode display (1) is illuminated.
i
NOTE: The ventilator for the cooling air still continues to run for about 30 seconds.
• Pull the plug.
• Let the device cool down, before you put it away.
Identification of the pot
The device has a pot recognition function. After the pot has been taken from the hob, it
switches back to the standby mode.
In this context, please pay attention to the following:
WARNING:
After having used the hot plate, you need to turn off the switches; do not only use the pot
detection.
Hazard of burns!Because of the heat radiated during cooking, dangerously high tempe-
ratures may occur at the cooking zone after the cooking cycle.
56
04.09.2007
14:33 Uhr
Seite 56