Jennair Rise JGRP648HL Instructions D'installation page 34

6. Lift clip up on the oven bake burner electrode bracket
with a finger or flat-blade screwdriver.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
7. Pull electrode out of bracket.
A
B
A. Grasp electrode here.
B. Bracket
34
8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orifice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orifice spud, then remove by turning the
gas orifice spud counterclockwise and lifting out. Set gas
orifice spud aside.
A
A. Gas orifice spud
9. Gas orifice studs are stamped with a letter and a number.
Install the Number 154 oven bake burner orifice spud.
10. Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
11. Push down on the clip on the electrode bracket.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip