Installation Instructions - Kinetico Water Systems premier PLUS Instructions D'installation Et Guide D'utilisation

12

Installation instructions

1
Locate:
a:
Ensure the unit can be
positioned on a flat surface.
b: If sand, silt or turbidity are
present in the water supply, a
pre-filter should be installed
before the water softener.
Kinetico Premier Plus Water Softener Installation and User Manual
2
Test water pressure:
Test incoming pressure to the
unit. A pressure regulating valve
will be required if the pressure
is above 6 bar.
3
Install:
Plumb pipework as necessary to
accommodate a by-pass assembly.