LG 32LV340C Guide De Configuration Rapide page 31

01. Power (Command: k a)
• To control Power *On or Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
• To Show TV is Power On or *Off
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
[a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit 'FF' data
based on this format, Acknowledgement
feedback presents status about each function.
02. Aspect Ratio (Command: k c) (Main Picture
Size)
• To adjust the screen format. (Main picture
format) You can also adjust the screen format
using the Aspect Ratio in the Q.MENU or
PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: Normal screen
(4:3)
02: Wide
screen(16:9)
04: Zoom
05: Zoom 2 (Latin
America except
Colombia Only)
06: Set by Program/
Original
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-
definition), Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.
01: *Power On
07: 14:9
(Europe, Colombia,
Mid-East, Asia
except South Korea
and Japan)
09: * Just Scan
0B: Full Wide
(Europe, Colombia,
Mid-East, Asia
except South Korea
and Japan)
10 to 1F: Cinema
Zoom 1 to 16
0c : 21:9 (Depending
upon model)
03. Screen Mute (Command: k d)
• To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on)
Video mute off
01: Screen mute on (Picture off )
10: Video mute on
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04. Volume Mute (Command: k e)
• To control volume mute on/off. You can also
adjust mute using the
control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off )
01: Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
• To adjust volume. You can also adjust volume
with the volume buttons on remote control.
Transmission
[k][f ][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack
[f ][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
• To adjust screen contrast. You can also adjust
contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
button on remote
23