Connecting To An Antenna Or Cable; Other Connections - LG 32LV340C Guide De Configuration Rapide

32LV340C
32LV340H
Model
40LV340H
43LV340C
43LV340H
VESA (A x B)
200 x 200
Standard screw M6
Number of screws 4
Wall mount bracket
LSW240B
(optional) MSW240
A
B
• Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
• When using the wall mount, it is recommended
that you apply a piece of tape over the Stand
holes to prevent dust and bugs from entering
the holes. (Depending upon model)
stand hole
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
• If you record a TV program on a DVD recorder or
49LV340C
VCR, make sure to connect the TV signal input
49LV340H
cable to the TV through a DVD recorder or VCR.
55LV340C
For more information about recording, refer to
55LV340H
the manual provided with the connected device.
• The external device connections shown may
300 x 300
differ slightly from illustrations in a manual.
M6
• Connect external devices to the TV regardless
4
about the order of the TV port.
LSW350B
• If you connect a gaming device to the TV, use the
MSW240
cable supplied with the gaming device.
• Refer to the external equipment's manual for
operating instructions.
• When connecting via a wired LAN, it is
recommended to use a CAT 7 cable. (Depending
upon model)

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
• Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby
Digital.

Other Connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable.
• HDMI Audio Supported Format: Dolby Digital
(32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1
kHz / 48 kHz / 96 kHz / 192 kHz) (Depending on
model)
• Use only with the 3-pole 3.5 mm Stereo Jack.
• Do not connect your headphones or earphones
to the port for connecting an external speaker.
Copper wire
9