ShelterLogic Super Max 26780 Manuel D'assemblage page 4

2. ATTACH ENCLOSURE END AND zIPPER DOOR PANELS
When securing enclosure panels to corner legs, note that each bungee is shared with the neighboring panel.
NOTE: Door panels zippers must be closed when securing door panel.
3. TIGHTEN THE COvER
A. Use 4 Ratchets to tighten down the corners of the
cover.
Adjust the cover so there is equal overhang on all
sides.
While the ratchet is in the closed position, thread the
cover's webbing through the ratchet as shown.
B. Insert "S" hook into the hole in the leg that is about
/
1
9 inches down the leg pole.
2
Tighten the ratchets equally, alternating from one
corner to another until the cover is tight.
Side
Wall
Panel
Page 4
Interior / Rear view
Back Panel
One bungee for
both panels.
A
/
1
9 in.
2
05_26780_26180_0B
B