Procedure For Mounting The Door Panel - Porter&Charles DWTPC10FI Instructions D'installation

INSTALLATION INSTRUCTIONS
5.3.2 Procedure for mounting the door panel (DWTPC10FI)
Mount the door panel.
Place the template on the inner surface of the panel, centering it along the up-
per side and matching up the reference locators (ref. A fi g. 5-18); mark the po-
sition of the door hooks with a pencil (see fi g. 5-18). Remove the template and
use a drill with a suitable bit to make holes at the points marked on the panel.
Use the screwdriver to secure the door hooks with the 8 supplied screws (see
fi g. 5-19) at the marked reference points.
Rev 0.0
A
A
Fig. 5-18
Fig. 5-19
EN
25