Functional Description - Makita AN453 Manuel D'instruction

008389

FUNCTIONAL DESCRIPTION

CAUTION:
Always disconnect the air hose before adjusting or
•
checking function on the tool.
Adjusting depth of nailing
1
008390
To adjust the depth of nailing, turn the adjuster. The
depth of nailing is the deepest when the adjuster is
turned fully in the A direction shown in the figure. It will
become shallower as the adjuster is turned in the B
direction. If nails cannot be driven deep enough even
when the adjuster is turned fully in the A direction,
increase the air pressure. If nails are driven too deep
even when the adjuster is turned fully in the B direction,
decrease the air pressure. Generally speaking, the tool
service life will be longer when the tool is used with
lower air pressure and the adjuster set to a lower depth
of nail driving.
CAUTION:
Always disconnect the hose before adjusting the
•
depth of nailing.
Hook
1
008405
1. Pneumatic tool
oil
1
1. Adjuster
1. Hook
CAUTION:
Always disconnect the hose from the tool.
•
Never hook the tool at high location or on
•
potentially unstable surface.
The hook is convenient for hanging the tool temporarily.
Adjusting the shingle guide
2
1
3
008391
008392
The shingle guide is designed for consistent shingle
exposure. Place shingle in desired position.
Turn the lever clockwise to release the adjusting plate.
Reset the tool on the exposed shingle with the
projections of the contact element depressing the
bottom of the previous row of the shingle. Slide the
adjusting plate up against the bottom of the exposed
shingle and turn the lever counterclockwise to lock the
adjusting plate.
ASSEMBLY
CAUTION:
Always disconnect the air hose before carrying out
•
any work on the tool.
5
1. Contact element
2. Shingle guide
3. Shingle
4
4. Projection
1. Adjust plate
2. Lever
1
2