Cleaning And Maintenance - WMF KULT pro Mode D'emploi

Start-up
Soft fruit and cooked vegetables can be strained and baby food or purée
can be prepared with the hand blender (5). Coarsely divide large pieces in
advance.
Please clean all parts described in the "cleaning and care" section before
allowing them to come into contact with food.
Prepare the desired food and fill a sufficiently large, tall and stable
container with the food, such as the supplied container (6).
Make sure that the device is disconnected from the power supply.
Attach the hand blender (5) below to the coupling of the drive unit on
the symbol (4) and turn this clockwise to the symbol (4). Click
the hand blender (5) into place. The hand blender (5) must sit firmly on
the device and should not be loose or fall off.
Using the speed switch (1) on the top of the device, select the desired
speed. You can also change this during operation.
Keep the hand blender (5) in the food.
Caution: Spray occurs easily during operation. To avoid spray, the lower
end of the hand blender (5) with the blades should always be completely
covered. Keep the device slightly angled with liquid foods in order to
achieve a better mixing.
If you are preparing hot food, then be sure not to hold the device in the
steam so as to avoid condensation on the drive unit.
Optionally, protect the drive unit and your hands from hot steam with a
small clean kitchen towel. Immediately wipe off the condensation on the
housing.First insert the mains plug into the socket.
Hold the container with one hand and press the
on button (2). The motor will begin to work
As soon as your food has the desired properties, release the on button
(2).
Alternatively, you can also press the turbo button (3) to process.
The device then operates at full speed.
Wait for the motor and hand blender (5) have come to a standstill and
then remove it from the container.
Always remove the mains plug from the socket before you place the
device on a suitable base.

Cleaning and maintenance

Remove the mains plug immediately after use.
Clean the hand blender (5) immediately after each use so that dried food
residue cannot damage the hand blender (5) during storage.
For pre-cleaning, simply run the hand blender (5) briefly in a container
filled with hot water.
To clean, the hand blender (5) must be removed by turning in a counter-
clockwise direction to the symbol (4).
10