EnglisH
16
16
2
1
cleaning the milk container unit
cleaning the milk container unit
For a reliable performance of the milk container unit and consistently good
frothing results, it is very important that you follow each of the 2 cleaning
procedures below:
Flushing after every use (when you do not plan to froth milk again
1
straightaway). After each use, the CLEAN indicator lights up to remind
you to flush the milk container unit. To flush the milk container unit,
fill the milk reservoir with water and press the CLEAN button. See
section 'Flushing after every use with the CLEAN button' in this chapter.
cleaning all parts of the milk container unit after the last
2
use of the day. To do this, remove the milk container lid from the
milk container. Open/remove the blue parts (milk container lid cover
and steam inlet) and the milk tube. Then clean all parts of the milk
container unit with hot water and some washing-up liquid or in the
dishwasher. See section 'Cleaning all parts after the last use of the day'
in this chapter.
If you are unable to obtain high-quality frothed milk, the milk container
unit is probably dirty. Clean the milk container unit by following the
instructions in section 'Cleaning all parts after the last use of the day' in
this chapter.
Note: The machine only continues to produce high-quality frothed milk if you
follow these instructions closely.
Flushing after every use with the clEan button
Every time you have used the machine to froth milk, the CLEAN indicator
lights up to remind you to flush the milk container unit by filling the milk
container unit with water and using the CLEAN button.
Note: You have to do this if you do not plan to froth milk again straightaway.
Philips advises you to flush the milk container unit within 30 minutes after you
have used it.
1
Move the milk container lever upwards and remove the milk
container unit.
2
Press the milk container lid release lever (1) and remove the milk
container lid from the milk container (2).