Maintenance And Service; After-Sales Service And Application Service - Bosch BBQ Fan Notice Originale

16 | English
Removal (see figures F1–F2)
Wear protective gloves and do not touch the nozzle while it is hot.
u
There is a risk of burns.
– Turn the unlocking ring (3) in rotational direction ➊ and pull off the fan
toward the front.
– Afterwards, fit the rubber cap (7) onto the screwdriver again.
Operation
Stoking a charcoal barbecue (see figure E)
The screwdriver and fan (2) may only be operated with the nozzle (1) and
hand strap (5) attached (see "Assembly", page 15).
– Start the material in the barbecue.
– Attach the hand strap (5) around your wrist.
– To start the fan, press and hold the on/off switch (4) of the screwdriver.
The fan can be operated both in clockwise and anticlockwise rotation.
– Hold the screwdriver and fan at an angle and point them toward the bar-
becue from above. Maintain a safe distance from the barbecue.
Do not use the screwdriver and fan for turning or distributing the ma-
u
terial in the barbecue.

Maintenance and Service

Cleaning
– Wipe off any dirt using a dry, soft cloth. Do not use any detergents or
solvents.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. You can find explosion
drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any ques-
tions about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
1 609 92A 5M0 | (27.03.2020) Bosch Power Tools