Wet And Dry Applications; Maintenance And Repairs - Nilfisk ALKO ATTIX 140 Mode D'emploi

Wet and dry applications

[ NOTE ]
■ The supplied filter must be correctly installed.
■ If the vacuum cleaner is used to vacuum liquids,
make sure that the liquid level sensor activates and
operates in the correct way.
WARNING!
Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
WARNING!
If the version for liquids is used:
■ Make sure that the liquid level sensor operates
correctly before vacuuming liquids.
■ If foam forms, stop the vacuum cleaner
immediately and empty the container.
■ Warning: Switch off the vacuum cleaner
immediately if foam or liquid leaks out.
■ Regularly clean the liquid level limiting device
and check to make sure that there are no signs of
damage.
■ Warning: the dirty liquid collected by the vacuum
cleaner must be considered conductive.
11/2008

Maintenance and repairs

WARNING!
Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts or
converting it to obtain another variant, the plug must
be removed from the socket.
■ Carry out only the maintenance operations
described in this manual.
■ Use only original spare parts.
■ Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action
would immediately void the EC declaration of
conformity issued with the vacuum cleaner.
WARNING!
To carry out maintenance operations which are not
described in this manual contact the manufacturer's
Service Centre or our sales network.
5
ATTIX 140 - ATTIX 150
GB
C320