LVI TOUCH E3 Manuel D'installation Et D'utilisation page 7

03. Put the device (radiator or remote control) in pairing mode.
• See device leafl et or manual
EXAMPLE: YALI DIGITAL /P/R
Press and hold the "OK" key for 5 seconds
rFi: Wireless Radio initialization (pairing)
Press "OK" to enter this initialization sequence.
Select with "+"or "-"the radio communication type and validate by pressing "OK":
• rF.un: unidirectional communication, the digital thermostat only receives orders
from an LVI RF central programmer.
• rF.bi: bidirectional communication with an LVI Touch E3. Th e digital thermostat
communicates state and power consumptions to the LVI Touch E3.
Th en the backlight will switch off and the digits will cycle showing that the digital
thermostat is waiting for a radio link signal from a Central programmer or LVI
Touch E3 to be received (press "�"to cancel radio initialization). When the radio
link signal is received, pairing is saved, then it will return to Auto mode.
• Start the pairing by pressing "radio pairing" button
• Follow the instruction on the screen (depending on the type of device) .
• Repeat the steps for all devices, starting at >> Select radio pairing
THE INSTALLER
f
f
P16MI417 - A06- 03/18
FOR
UK
RADIO PAIRING
BUTTON
7 |