Resetting The Camera - Medion E89269 Mode D'emploi

9. Resetting the camera

In order to reset the IP camera to the factory settings
to resolve any existing connection problems, proceed
as follows:
 Press the RESET button on the rear of the cam-
era using a pointed object (e.g. a paper-clip) for ap-
prox. 10 seconds.
 Release the button as soon as the LED status indi-
cator flashes orange.
 Wait until the IP camera has restarted. The camera
is ready when the LED status indicator is lit perma-
nently in green.
Once the camera has been reset, the LED status indica-
tor will go out when there is no network connection to
the IP camera via a router/access point/switch.
70 of 204