Linea 2000 Domo DO9239W Mode D'emploi page 17

The display shows the selected unit of weight:
· Weight: expressed in g/kg or lb oz
· Volume of water: expressed in ml or fl oz
· Volume of milk: expressed in ml or fl oz
CHANGING THE WEIGHING UNIT
You can change the weight unit of your scale from g/ml to lb. oz./fl. oz. Press and hold the UNIT button for
a few seconds. The display shows the selected unit of weight.
ZERO OR TARE FUNCTION
You can successively weigh different things without having to remove them from the scale
each time by pressing the ZERO button.
For example: you place a bowl on the scale. This indicates that the bowl weighs 800 grams.
By pressing the ZERO button, you can set the scale back to 0. If you now sprinkle 500 grams of flour into
the bowl, the scale will indicate 500 grams. The 800 grams of the bowl is not counted. The scale uses 2
functions for this purpose:
Zero function: for ingredients less than 200 g
Each time you press the ZERO button, the weight will be reset to zero. The maximum weight remains 5
kg.
Tare function: for ingredients over 200 g
Each time you press the ZERO button, the display will show 0, but the scale remembers the previous
weight. If you press the ZERO button again, you will get the sum of the weighed ingredients. The sum of
the ingredients may not exceed 5 kg. If you still want to weigh ingredients, press the ZERO button again
and the display will show 0 again.
WARNING INDICATION
Lo: indicates low battery.
Err: indicates scale overload.
www.domo-elektro.be
17
DO9239W