Main Functions; Time Setting; Operating Mode - CIAT MicroCONNECT Manuel D'utilisation

4-2 ) Main functions

4.2.1 Time setting

Set the control knob to
Setting the day and time is done withr
Each passage over 24.00 allows you to change the day.
Brief press: Advance at steps of 1 minute.
Long press: Fast advance.
Pressing on the OK key triggers the passage to the following day.
NB: The unit is at standstill when in time setting mode.

4.2.2 Operating mode

The switch has 8 settings described below.
Stop the device.
Set the time.
COOLING operating mode.
HEATING operating mode.
ANTI-FREEZE operating mode.
COOLING weekly programming mode.
HEATING weekly programming mode.
SWIMMING POOL heating mode (option).
4.2.3 Programming
The remote control terminal is set in the factory for standard installation.
You must configure the terminal as a function of the specific characteristics of your
installation.
This operation must be done once and for all by a qualified technician when starting up.
+
Caution, note that only reversible devices can operate
in heating, frost free and swimming pool modes.
-
and .
11
OK